Plastic window handle: how to remove, disassemble, adjust and change yourself, as well as how to open without a handle and what to do if it turns tight?

The handle of the plastic window is part of the locking mechanism.

Thanks to her, it is possible to adjust the position of the window sash. The mechanism is located not only inside the window, but also along its ends.

All parts of the mechanism must be made of high quality metal and have a long service life.

Moreover, the handle is the weakest link, since the conceived is made of silumin or plastic. In this article, you will learn how to replace, install, and secure various types of handles.

Why you may need to remove: breakdowns and ways to repair them

The need to remove the handle arises in cases where there are problems in its operation. The most common reason for a handle to be removed is a broken handle. Low-quality mechanisms fail during short-term operation.

Among the most common problems are the following:

breakage of the handle;
dangles;
turns;
wrong position during closing.

In most cases, it is enough just to tighten, clean and lubricate the mechanism, since over time it gets clogged with dirt, starts to work poorly, and because of this it completely becomes unusable, all this repair can be done without problems with your own hands, without resorting to the help of specialists ...

Also, cases of jamming of the mechanism are not uncommon due to the fact that the window is slightly warped over time. This additional load will inevitably lead to breakage of the handle.

The tools you need

Do not rush in case of a broken handle on a plastic window. Before changing the handle on a plastic window, for high-quality work, you need to read the appropriate information, also purchase and prepare the necessary tools:

obviously the newest pen. Better in the same style as the failed one. You can buy it in a special store;
screwdrivers of various sections;
hexagons;
pliers;
grease.

Handle for a plastic window or How to change the handle on a plastic window or door yourself.

Even more Useful for you at: http // oknatuning.ru Everything about pens

for
plastic windows
and not only about
pens
... How.

How to replace the handle on a plastic window

This video describes in detail the replacement method handles on a plastic window

... Happy viewing! Our website:

Plastic window handle replacement tools

Mechanism options - which are the best?

Useful

In order for the window fittings to "live" as long as possible, it is very important to choose the right quality handle.

By the set of its functions and design features, they can be divided into the following types:

ordinary (classic). They do not have any special or additional functions and are only able to close / open the window and put it on airing;
with a locking mechanism. Such fittings have a built-in lock that can be locked with a key. It is not possible to open the window without turning the key, which is especially important if there are small children in the room;
with a push-button lock. As in the previous version, the push-button mechanism is designed to provide more security;
shell handle. It is mounted from the outside and is necessary in order to cover a window / door from the outside, for example on a balcony;
with a bend. Such fittings are used in cases where the sashes open outward;
anti-burglar option. The mechanism blocks the window if it is subjected to mechanical impact or pressure from outside;
removable. These are often used in offices, hospitals, schools, etc. to ensure maximum safety;
bilateral handles are used for windows and doors that lead to a loggia / balcony or terrace.

After the set of functions has been determined, you need to turn your attention to the material from which the fittings are made. The most common are plastic handles. They have a low cost, but the operational life is poor.

Better manufacturers use other, durable materials:

galvanized steel;
brass;
aluminum, etc.

The base is varnished, and for an aesthetic appearance, a layer of plastic is applied over it. These pens can be used for many years without any problems. Despite the fact that high-quality products cost a little more, due to their long service life, they fully pay for themselves.

Before the final choice, you also need to hold several types of models in your hand to determine the tactile sensation. The handles can have finger recesses, arcuate or smooth. Any option can satisfy a specific consumer and become an excellent addition to the interior.

Types

The lever, in addition to its direct purpose, is a decorative interior decoration. The industry produces several types of such products.

Removable

Sometimes designers use devices for the full purpose of the sash, which can be removed and reinserted if necessary.

With key

In order to protect children, to prevent external hacking, fittings in the form of a key or a lock button are used. With the help of the device, the frame is securely fixed in the closed position or folded out for ventilation.

The device is suitable in a situation of a long absence from home, as well as for the protection of small children.

The set includes 2-3 spare keys.

With button

The principle of operation of the push-button and lock design is identical. The bottom line is that the pivot action is only performed when a button is pressed.

Secustik

The developers have invented a device called the Secustik that protects the frame from unauthorized swinging. Even with external influences, the fittings cannot move.

The built-in connecting piece performs a stabilizing function, preventing the handle from turning, blocking it.

Curved

For the practical purpose of not touching the frame, they have invented curved handles that are comfortable when swinging outward.

How to open correctly?

For a simple window opening, you need to slightly press the opening sash to the frame, and with the other hand rotate the handle 90 degrees so that it is horizontal.

Now it is enough to pull the handle towards you to open the window. Closing takes place in reverse order until the handle returns to its original, vertical position.

For tilt opening, you need to turn the handle 180 degrees upward, holding the sash, and then fold the sash... The window is closed in reverse order.

Attention

It is very important to always press the sash tightly against the frame, otherwise the mechanism will not last long.

To open the window for ventilation, you first need to turn the handle to the tilt opening mode, then (without opening the window), turn it to the side by another 45 degrees, then pull the handle until the upper part opens.

Plastic windows

60 votes

Voice for!

—

Against!

Plastic windows are not as simple products as it might seem.All sash positions are controlled with just one handle, which transmits forces to multiple gearing mechanisms of the hardware. It is not surprising that the handle of the plastic window is the first to fail, because it is constantly pulled, turned, twisted. But there may be problems immediately after the installation of windows, if they are not accurately adjusted or have a factory defect. There may be other reasons, though. If you install plastic windows in compliance with all technologies and nuances, and then use them carefully, they can last for many years without the need for repairs. But if, nevertheless, the handle for a plastic window breaks, or it is jammed in any position, or it does not turn, or does not turn completely, then you should not despair, you can fix this problem yourself. In this article, we will talk about how to disassemble the handle of a plastic window, how to adjust it, repair it or replace it with a new one, without the help of specialists. To do this, you need straight arms, an L-shaped hex key 4 mm, a Phillips screwdriver and a smart head on your shoulders.

The handle of the plastic window is stuck in the "closed" position, and the window sash does not close
The handle of the plastic window does not turn or does not turn completely
The handle of the plastic window is loose
The handle on the plastic window is broken - replacement of the handle
Choosing a handle for plastic windows

The handle of the plastic window is stuck in the "closed" position, and the window sash does not close

It is quite possible that you have encountered such a problem - the window handle is in a position that absolutely does not correspond to the position of the sash, and it is impossible to turn the handle - it is jammed. For example, the sash can be open and the handle is in the "closed" position. You are just about to close the window, but it does not work, since it is impossible to turn the handle. What to do? First of all, do not jerk the handle too much, this will not bring a positive result. The reason for the sticking of the handle of the plastic window is that it did not work in time blocker.

Almost all modern windows are equipped with a special lock that blocks the handle from turning. This was done with a good purpose - so that you do not accidentally break the window. When you turn the handle to the tilt position (the handle is facing up) or to the rotary (the handle is located horizontally), the lock is triggered and prevents unintentional rotation of the handle. It happens that the blocker does not work on time. This most often happens if you move the handle position too quickly. How to repair the handle of a plastic window in this case? First of all, it is necessary to determine the manufacturer of the fittings, the method of disabling the blocker will depend on this.

The name of the fittings can be seen on any metal part of the window. This is easy to do if the flap is in the open position. Most often, the name is just located in the area of the handle, on the end part of the sash.

If you have AUBI fittings: the sash must be in a vertical position to release the bollard. If it is in the swing-out position, then the lock located on the upper hinge will also prevent the handle from turning. Therefore, we transfer the sash to a vertical position, then in the area of the handle on the end part of the sash we find a plate with a spring. It is necessary to press it against the seal, and then turn the handle into the position characteristic of the sash location.

If you have fittings "Maco", "Roto", "GU", "Winkhaus": also in the area of the handle on the sash we find a metal plate, which is not located vertically, but is at an angle to the frame and sash. It must be pressed down so that it is parallel to the frame, i.e. strictly vertically, then turn the handle to the desired position.

If, when you try to close the window, you still do not turn the handle, then you should check whether the blocker is in contact with the response mechanism. A situation is possible when the blocker slips past without catching on the mechanism. The reason is thermal expansion.

If you notice that the blocker "slips", then you need to open the sash, find a response mechanism, unscrew the screws with which it is screwed to the frame, then remove it, put something between it and the frame and screw it into place. You can use a piece of non-thick plastic as a lining. As a result, the response mechanism should be located farther from the frame, and the blocker should engage on it. We try to close the window again. If it works, then the repair is over.

The nuances of the Winkhaus fittings: some models of windows with this fittings are only equipped with a lock on the tilt-and-turn scissors. In the process of operation, this blocker wears out as a result of constant friction, therefore, over time, it may fail. This is characterized by the fact that the handle can only be turned to the "open" (horizontal) position or to the tilt-and-turn position for ventilation (handle up). In such a situation, you cannot try to close the window and turn the handle, applying great effort. The main constipation gearbox may break. This is the case when it is better to entrust the repair to professionals, especially if the windows are still under warranty. If you intend to solve the problem yourself, you will have to remove the window sash.

On the upper hinge of the sash, you need to remove the decorative strip, then pull out the pin that holds the sash in the frame. For this, a screwdriver and pliers are used. Carefully remove the sash from its hinges, place it on the floor and remove the scissors. To remove the scissors, you must unscrew the screws that secure them. We remove the blocker and put the scissors back.

If all the above procedures did not help, do not be zealous, contact the professionals.

The handle of the plastic window does not turn or does not turn completely

The problem of another property, when the handle of a plastic window does not close, when trying to close the window, the handle does not turn completely. In this case, if the window is opened and you try to turn the handle to the “closed” position, having previously disconnected / pressed the lock, then the handle turns easily. There can be two reasons for this problem.

The first one is the grease in the fittings has dried... As already mentioned, the operation of the window is provided by a variety of transmission mechanisms, so their movement should be light and smooth. If the lubricant in the fittings has dried out, or dirt has got into it, then its work is disrupted. If the reason is only in lubrication, then you can repair the handle of the plastic window yourself. To do this, you need a grease: either a universal grease, or a special grease for plastic windows, or, in extreme cases, WD-40 grease will do.

It must be poured into all moving parts of the fittings; this can be done through the holes, including in the upper part of the fittings. Then it is necessary to turn the handle to one position, then to another, so the fittings will move and distribute the lubricant over its surface. If the reason is only the lubrication, then this should be enough. If the reason is in the dirt that has gotten under the fittings, then it is better to invite the master, since you will have to remove all the fittings from the window and rinse them in a special bath.

The second is sash sag... This may not be visible to the naked eye, but even one millimeter will be enough to prevent the handle from moving to the closed position.

Sash position "up-down" can be changed using the adjusting screws. It is necessary to remove the decorative plug from the lower sash of the plastic window. There is a hole on the top of the hinge mechanism for a 4mm Allen key.

We insert the L-shaped key into the adjusting groove and turn it. If you turn it clockwise, then the sash will rise, if it is counterclockwise, then it will go down. Each time, making several turns, we try to close the sash. In some types of fittings, the adjustment groove is located on the front surface of the hinge (as in the photo).

The sash can also be adjusted horizontally - "left-right"... Usually the top and bottom of the sash are adjusted separately.

Bottom part - using the bottom hinge. If you open the sash and look at the side surface of the lower hinge, then an adjustment groove will also be visible on it. We insert a 5 mm hexagon into it and turn it. Clockwise - the sash moves to the left, counterclockwise - to the right.

The upper part of the sash is regulated by a mechanism located on the sash itself - at the top. To adjust, the sash must also be opened, almost wide. At the back, almost at the very top, there will be an adjustment groove. We insert a hexagon into it and turn it.

The handle of the plastic window is loose

It happens that the handle of a plastic window just loosened. It scrolls to all positions, but nothing changes. The reason is most likely that the handle attachment is loose and the handle mechanism does not engage with the hardware mechanism. This problem is very easy to solve.

The handle of the plastic window is adjusted using two screws that screw it to the sash. On the sash directly under the handle there is a decorative element - a plug (rectangular). It is necessary to gently pry it with your hands, pulling it towards you, and then turn it 90 degrees. Those. the plug must be placed horizontally.

You will see two mounting screws - one on top of the handle and one on the bottom. They must be tightened with a Phillips screwdriver.

The handle on the plastic window is broken - replacement of the handle

This situation is rare, but it still happens: the handle can crack, break, or simply become unusable from old age. In this case, you will need to replace the handle on the plastic window. There is one more reason to change the "native" handle, even if it is in good working order - the need to install a handle with a lock. When there are small children in the house and parents want to make it so that the child could not open the window or door to the balcony himself, then special handles with locks are installed.

To remove the handle from the plastic window, you need to unscrew the two screws mentioned above. But first you need to open the sash so that the handle is in the "open" position. After the screws are unscrewed, you need to remove them and then carefully remove the handle.

You can buy a new handle in the construction market or in a construction supermarket, as well as in a company that produces plastic windows. In addition to the usual handles, you can purchase a handle with a lock and even a "comb" that limits the opening of the window.

The handle is installed on the plastic window using the same screws that held the previous one, although new ones can be used. If you plan to install the opening limiter, then insert the regulator plate (“comb”) into the base of the handle. Then the handle pin is inserted into the hole, and the handle itself is screwed on with screws.

Choosing a handle for plastic windows

Handles for plastic windows are produced not only by the same companies as accessories. For example, you can buy a pen made in China, Turkey, Austria, Germany, Great Britain, Poland and other countries. Window handles for plastic windows are considered as a consumable, they may differ in shape, but they are necessarily universal and suitable for all models of windows and all fittings. The material of manufacture is aluminum, the most common color is white, but the handles can also be "wood-like", gold or bronze. So you can match the color of the windows.The shape can be rectangular, or round, and with indentations for the fingers.

For a handle for a plastic window, the price practically does not depend on the shape, only on the quality and manufacturer, as well as on the color (non-white handles are more expensive). For example, a Chinese pen will cost only $ 2.5, a Turkish pen - $ 8.7, a German and Austrian one - $ 10. The price of a pen from the UK depends on the shape and ranges from $ 12 - $ 15. A separate category is handles for plastic windows with locks: Polish ones will cost 25 USD, and the same analogue from Great Britain will cost 36 - 38 USD.

Repairing or replacing the handle of a plastic window is one of the easiest tasks in repairing plastic windows. This does not require qualifications or additional knowledge. The main thing is not to panic and follow the instructions given. If the above tips do not help, then be sure to call the wizard so that he can see the problem with his own eyes.

Adjust if turns tight

A handle that turns tightly entails not only inconvenience of use, but also subsequent replacement, as this indicates premature wear and damage. There may be several reasons why the knob turns tight, as well as solutions to the problem:

Clogged mechanism... Quite an acute and widespread problem, especially during the renovation of premises. Dust clogs the moving parts, which requires force to open / close the window. To return the ease of control of the window sash, it is necessary to remove all the fittings, clean, lubricate and reinstall.
Answers are incorrectly located... Incorrect installation or adjustment leads to draft. It is very important not to start the adjustment yourself, since this process requires some experience and some knowledge, so you need to invite a specialist.
Defect in production... If the quality control department did not notice that the handle is turning tight, then it will have to be replaced.

Proper home care

Timely cleaning guarantees a long product life. When caring for a window, it should be taken into account that it is necessary:

Lubricate mechanisms.
Watch for seals.
Take care of drainage holes and fittings.
Keep the mosquito nets in order (you can find out how to fix the mesh if it breaks).
Adjust windows.

The first step in cleaning a window is to remove dust and dirt. This is done with a napkin and a special window cleaner. It can be purchased at specialized retail outlets. Lubrication of mechanisms is an important task in cleaning. The operation of the entire window and its validity period depend on the mechanisms.
You can purchase lubricating oil at window sales centers or hardware stores.
The seal also needs maintenance. To keep it in order, you need to clean it from dust and dirt and treat it with a special agent. If replacement is required, you can easily do it yourself.
If the drainage holes are not cleaned, the windows may fog up, ice build up on the glass, or the humidity level will rise markedly. You can clean the holes with a toothbrush or a hard brush.
Needs timely maintenance and mosquito net. It must be washed in soapy water. It is better to remove the net for the cold season.

Attention

Thorough cleaning of the window should be done at least once a year. It is best to do this seasonally: in early spring, summer, winter and fall. This will significantly increase the lifespan of the glass unit and small parts.

You can repair plastic windows yourself. In this case, the most important thing is to slowly find the problem and fix it carefully and according to the rules. You can do without the help of a master.

Open without handle

If the handle falls off, breaks or is removed, then you can open the window without it. For these purposes, you need to follow a few simple steps:

carefully inspect the place where the handle casing is inserted;
often the hole is square, so you need to choose a suitable item for it;
insert it and use it as a lever to turn the mechanism.

If you have the right tools at home, you can try to pick up hex, tetrahedral or L-shaped keys. If you don't have the right tool, you can try using a regular flathead screwdriver of the correct width. You need to insert it diagonally from one corner to another and turn the screwdriver along with the mechanism.

Dismantling stages

To properly dismantle the plastic handle on the window, first of all, you need to know how to properly use a screwdriver, hammer and pliers. All work must be carried out carefully and carefully so as not to damage the mechanism and the frame of the plastic window.

The main stages of the work are as follows:

Rotate the broken handle to the horizontal position. If this action cannot be performed with your hands, then you can use pliers. If the shutter mechanism is not damaged, the window will be open. Otherwise, you can put the mechanism in the correct position after removing the handle.
Pull and rotate the cover under the handle. This will allow you to get to the screws in the fastener.
Tighten the screws with a Phillips screwdriver. Most suitable with a sting RN2, RN3. If they are strongly seized over many years of operation and it is not possible to unscrew them with one screwdriver, then experts recommend trying to use a hammer. Insert a screwdriver into the slots of the screw and tap the back of the screw with a hammer. To speed up the process, turn the screwdriver counterclockwise during the process.
Pull the hand piece towards you and remove it. If it is jammed, you can tap it with a rubber-tipped hammer.
If the handle cannot be removed, then experts recommend pushing the flat tip of the screwdriver under its base and, in parallel, pressing on the screwdriver, try to pull the handle towards you.
Inspect the mechanism shaft for possible damage.

How to change it yourself?

If the restoration of the handle is not possible, then it will be necessary to purchase a new piece of fittings and replace it. This process does not cause difficulties, therefore it can well be carried out independently.

Disassemble

The handle itself must be moved to a horizontal position, after which a protective plastic panel must be found under it, which must be turned in one direction or the other, and fastening screws are found under it.

Important

This panel can be easily rotated by hand, so there is no need to use a screwdriver or other tools.

Now you need to select a suitable Phillips screwdriver for these screws, which must be completely unscrewed.

After they are unscrewed, the handle can be easily removed, since it does not have any more clamps and fasteners.

Install

Now, in place of the old handle, it is necessary to put a new one, but it is very important to ensure that its position is identical. The handle is fixed with the same screws, since almost all parts of PVC windows are brought to a single standard.

But if there is a need for additional reinsurance, then you can first dismantle the old handle and go with it to buy a new one in order to pick up an identical one.

Screws do not need to be tightened completely, then check whether the handle was installed in the correct position in all window opening modes. Next, you need to securely fix the handle, return the protective bar to its place and use the window for your own pleasure.

Is it possible to do without a master

Thus, most of the problems associated with pens are fixed in minutes.It is not difficult to adjust the fittings, twist the handle, and replace it. This significantly reduces the cost of repairing a plastic window, since the price of the services of the craftsmen is rather big, and you only have to pay for a new part or lubricant. It makes sense to call a specialist only in case of serious malfunctions, with a valid warranty, or you are afraid that by your actions and attempts to repair the handle, you will finally break the window.

If you have any questions regarding pen repair, you can always contact me directly, I will try to understand the problem in detail and advise.

Tel:
8 (906) 771-74-64
Post office:

Submit your application

Comments (0)
VK Comments
Facebook Comments

Comment form

Please fill in the required fields.
Error sending comment. Try again.

Thank you, your comment will be published after verification.

Add a comment with VK

Overview of typical problems

The following defects are most often found in products:

incorrect functioning of the blocker;
contamination or drying out of the lubricant;
the need to adjust the mechanism;
handle wear;
sagging flaps;
the need for strong, sharp movements to open.

If the lever spins without making a sound, it is most likely a steel rod falling out. You need to pry off the larva, which is located at the very base, place it at a right angle. Using a screwdriver, remove the two screws holding the structure on the sash and remove the masking hardware. Next, grab the rod with pliers and fix it in the base. In the process of reassembling the handle, you need to be guided by the fact that when closed, it should look down. The final step is screwing in the bolts and installing the masking cover.

When the handle emits a characteristic crackle during use, experts do not recommend disassembling it yourself, since there is a high risk of damage to the working mechanism.

The problem of cracking in the product is also common. Such a defect cannot be eliminated by yourself; it is easier to install a new handle. When choosing, you should be careful: all characteristics of the models must be identical. Guide to action:

it is necessary to turn the plate located directly at the base, in this case free access to the fasteners will be open;
after removing the screws holding the lever, you can easily remove the damaged element;
where the new handle will be placed, the comb must be correctly positioned.

Installing a new handle
If the plastic lever breaks off, you need to remove its base from the sash and replace it with a new one. The broken part must be positioned with pliers in such a position that the panel rests on the side hinges when open. Next, you need to unscrew a couple of self-tapping screws that fix the case, and carefully free the frame from the broken piece.

The next step is to install new hardware. When looking for a suitable model, first of all, you need to consider the parameters of the inner members - these are the key working components. Usually the handles are equipped with stops, so you need to take care of the correct position of the comb. Care must be taken when retightening the screws, as if tightened too tightly, there is a high risk of damage to the thin plastic case.

The main causes of breakdown

There may be several reasons for refusal. The most common of these is the usual loosening the fixing screws, which is why the parts cease to interact closely with each other. Any refusal is expressed in the termination of the free wheeling, the inability to close the lock. The problem is caused by a long service life, difficult operating conditions, in particular - exposure to moisture for a long time.

A plastic window is the boundary between two temperature regimes, which creates favorable conditions for the appearance of condensation.

Despite the sufficiently reliable protection of the structure, condensation to one degree or another occurs on metal parts, which sometimes becomes the reason their failure.

Before removing the handle from a plastic window, you should try to determine the essence of the failure and the cause of its occurrence in order to avoid unnecessary work.

The appearance of a working out on the working part of the part is often found. From constant use, the edges of the square section are grinded, causing the appearance strong backlash. By turning the handle to the "open" position, it is impossible to achieve sufficient impact on the opening mechanism located inside the plastic profile. In such a situation, there are no other solutions except how to change the handle on the plastic window.