What means to wash plastic windows - useful tips

What will we use:

Detergents:

• Warm water + ammonia (1 tablespoon per liter of water);
• Warm water + vinegar (2 tablespoons per liter of water);
• Warm water + laundry soap (cut the soap into small shavings and stir in water until foam appears).

Instruments:

1. Rubber scraper

2. Clean, dry microfiber cloth (absorbs water well and does not leave streaks)

Washing technique

In order for plastic to remain aesthetically attractive for a long time, you need to know how to wash plastic windows at home and follow some rules for caring for them. The main point is the right choice of inventory. Do not use abrasive products that can scratch the plastic surface or scratch the glass... Use soft rags, sponges, paper towels and napkins.

To wash the glass unit, you must use soft rags and sponges.

Also, remember some rules:

• wash windows on a cloudy day so that the glass does not dry so quickly, and you have time to wipe the surface before rainbow stains appear on it;
• first of all, the frame is cleaned, then only the glass unit;
• apply the detergent composition evenly and in one direction, circular motions create streaks;
• for glasses it is better to take special alcohol solutions of detergents.

For a good cleaning quality, it is worth following the correct sequence of actions. If the window was recently installed, you need to peel off all the film that protected the frame during transport.

It is necessary to peel off all the film that was used during the transportation of the glass unit

I wash the plastic from dust and dirt with ordinary soapy water. If there are separate areas of strong contamination, they are treated with special agents. Minor scratches can be removed with polish. However, not all products can be used to clean plastic windows.

Important! Remember not to use:

• abrasive powder products will leave scratches on the surface, creating an untidy appearance of the plastic structure;
• Acid and solvent can discolor the panel and should be used with caution.

How to clean fittings

When cleaning windows, fittings are often forgotten, and this is the most important part of windows. All window properties depend on the state of the fittings and the seal. It is better to wash the fittings and the seal with ordinary soapy water, which must be washed off well, and then thoroughly wiped off with a soft cloth. It is strictly forbidden to use aggressive agents, solvents, etc. to wash the seal.

After washing, the fittings must be lubricated with machine oil, it is recommended to do this every six months. It is recommended to lubricate the seal after washing, as well as every six months, with glycerin or silicone grease.

Proper care of the plastic frame and glass unit

The durability of use is due to proper care. This is especially true in the winter season, so you need to know how to care for plastic windows in winter.

A hex key is used to adjust the plastic windows

In order to prepare the window for winter, you will need tools and inventory. These include:

• rags and napkins;
• soft brush;
• hexagon;
• grease for the seal;
• machine oil.

Sequence of work

First of all, it is necessary to wash the windows from dirt and dust accumulated during the spring-summer period. In this case, soft rags and napkins are used, as well as non-abrasive detergents. Stubborn dirt cannot be removed using a knife and cleaning powder... Before you start cleaning the windows, it is worth brushing off the dust with a brush.

Dirt accumulated over the summer can make it difficult to open and close a window.

After that, you need to start adjusting the fittings. This can be done using a hexagon. In order to avoid the penetration of cold into the room in winter, it is necessary to switch the clamps on the shutters to winter mode. This will make the fit of the window frame stronger.

Switching the window to winter mode provides a tighter fit of the frame

It is important to lubricate the fittings with oil. After applying it to the parts, you need to open and close the flap several times, this will help the oil to distribute. This procedure should be repeated throughout the winter, the main thing is not to do it in severe frosts.

It is necessary to lubricate window mechanisms several times per season.

The seal also requires attention. Rubber products wear out over time and no longer fit snugly, this affects the tightness of the window. You can wash the gum directly on the window or by removing it. The procedure must be carried out with the use of a detergent, and then be sure to wipe dry. The process ends with the application of a silicone rubber sealant.

Silicone grease prevents rapid wear of the rubber seal

If you see that the window fogs up in winter or condensation collects, then you need to contact a specialist... They will check the condition of the rubber seal and replace it if it is worn out. It is important to replace parts on time, this will help extend the life of the window.

Double-glazed window maintenance

Provided that the plastic window is correctly installed, the glass unit will last about 40 years. When installing, make sure that the windows are in a special protective film that will protect them from scratches during transportation and installation. Such windows do not need painting or pasting for the winter, but it is still necessary to wash them at least twice a year. Do not do this at low temperatures, as the glass can burst from contact with water.

The glasses can be washed with soapy water. Do not use abrasive powders and brushes that scratch the glass surface.

Window sill care

The window sill deserves special attention. This is especially true for those who like to decorate their apartment with indoor plants. Water from watering flowers, falling on the windowsill, forms yellow circles over time. These stains are very difficult to remove, and sometimes simply impossible, so it is worth using a special self-adhesive film on the windowsill, which is white or another color, as well as trays for indoor plants.

The window sill is protected from moisture using a special film

The texture of the windowsill may differ from manufacturer to manufacturer. They can be smooth, porous, or rough. When selling, the consultant usually talks about what kind of material was used for the window sill and how to wash the dirt. However, some peculiarities should be taken into account, for example, a rough window sill can be cleaned using a stiff brush, but in no case should a scraper or knife be used.

Slope maintenance

Slopes also need care, but the means for this directly depend on the materials from which they are made. If they are made of plastic, then they will not require special care.They are easy to clean and clean from dust and dirt. A special feature is the need to replace the sealant, which, several years after installation, is completely removed and replaced with a new one.

After several years of operation, it is necessary to replace the sealant

If the slope is made of drywall, then it is covered with paint that can be washed and, if necessary, renewed. When using cork or bamboo, it is enough to systematically wipe them with a damp cloth to remove dust.

Plastered slopes should not be washed, since they are unstable to moisture, they can be wiped with a damp or dry cloth... Acrylic sealant should be used at the joints, and the surface should be painted in a timely manner.

By following simple recommendations for the care of plastic windows, you will be able to use them for a long period of time.

Security measures

Keep cleaners out of the reach of children. It is strictly forbidden to smoke in the work area, there should be no sources of ignition nearby.

Work should be done with good ventilation of the room, vapors of cleaners are harmful to the respiratory system. Do not allow liquid to get into eyes or skin. Hands or other areas of the skin are washed with water upon contact, the eyes are washed, after which they seek medical help. If the drug enters the gastrointestinal tract, vomiting should not be induced, you should urgently consult a doctor.

Cleaning windows with a scraper

The scraper is a device similar to the letter "T". A telescopic handle with a horizontal rubber squeegee allows you to reach the very top of large windows so that the soapy dirt can be pulled down and rinsed out below. This device is very useful for large display cases and tall glass units.